This compact cabinet was the fits alongside the Wall Shelves and Coffee Table I delivered back in March. Made from birch ply with elm handles the cabinet features a main cupboard and single drawer. The solid elm top is shaped to match the coffee table and ‘floats’ on a recessed piece of 6mm plywood to create a nice shadow line. Off cuts from the top where used to make the simple handles that add to the clean mid century style.
This handsome little side table was designed to compliment the Volvo Car Seat Armchair made last year. The frame features four curved and tapered legs that reference the back leg / armrest from the chair. They are jointed onto a simple half - lap rail to form a strong base frame for the circular top.
The base frame is made from the wood left over from the chair - a nice rich red elm. This contrasts nicely with the Wych elm used for the top which has the characteristic brown tones and green accents.
Standing at 50cm tall it is the perfect height to put your cup of tea on while relaxing in your favourite chair.
I like it when I client gives me a challenging brief that requires some lateral thought. On paper this was a simple set of shelves with a mid century modern feel to display personal items and house a small flatscreen tv. The challenge was to make a 4 x 2 meter run of shelves in sections that could be easily transportable and simple to install with minimal wall fixings. Oh and it had to float off the wall to avoid cutouts in the uprights for the skirting board and keep a clean vertical line.
Thankfully the client’s design broke down into two main sections - the ‘bookcase’ on the far left and then ‘tv shelves’ on the far right. The section in between is bridged by a series of individual shelves that tie the whole thing together. Each section is comprised of 18mm birch ply components which are either permanently glued together or use ‘knock down’ fittings to join them. The ‘tv shelves’ are made from character elm boards to bring a richer hue to the piece and are profiled with a curve shape. A small coffee table completes the commission with a birch ply base and elm top in a simple mid century style.
Back in 2015 I made a pair of TopGear inspired carseat armchairs for a client. Well just last week I delivered an updated version of the design. This time for a beloved seat from a Volvo 940, the chair features a laminated one piece armrest / rear leg. This gives a nice swept feel to the piece and a a sense of momentum.
Made from scottish elm with oak used for design details and pinstripes. Through wedged tenons have been used extensively to give a very strong frame with a decorative element. The arm and legs have been profiled on the router with a Queen Ann cutter to give a gentle radius to the edge. This gives a real tactile feel to the piece that adds to the overall comfort.
I finished this handsome Dining Bench just in time for this years Scottish Furniture Makers Association Annual Exhibition. A stunning matched pair of elm boards make the seat with walnut dovetail keys tying the pair together. A hand planed curved edge gives a multi-faceted edge to the the seat. This treatment is also applied to the bench frame which softens the profile and encourages you to touch the tactile edge.
The first project of 2018 completed and delivered yesterday - a sink stand made from the client's own reclaimed teak and mahogany. The brief called for a simple chunky design with angled legs with a single shelf for towels etc.
The reclaimed teak looked quite tatty and tired when I picked it up but after scraping and sanding off the old varnish and dirt the lovely rich grain was uncovered. Teak is one of the most oily tropical hardwoods there is and unsurprisingly all the machinery that came into contact with it was coated in an oily residue in no time. It actually machined very well unlike the mahogany -which has a reversing grain. Fortunately the drum sander was ideal for smoothing off the rough surfaces and is a life saver with difficult timber like this. In order to get the thickness required for the tops and shelf I laminated two layers of boards together in the bagpress to give a finished thickness of 54mm.
Finished with a penetrating oil (Osmo Extra Thin) the grain really came alive and the contrast between the chocolate brown teak and rich red mahogany worked really well. This was the first time I've used tropical hardwoods for a whole project and it was interesting to learn a few new techniques. Not sure I'd be keen to do more work in tropical timber as I prefer native species but I have to admit that the grain and tones of the wood do look pretty cool.
Following on from the earlier prototype I've recently finished another wood veneer lamp. This one is in ash with elm framework and lovely burr elm base. The lamp shade is much taller at 700mm which works really well with the veneer grain running vertically. The ash is a lighter blond coloured wood and lets through more light due to the more open grain. Overall this lamp stands at 900mm tall which is perfect for a feature lamp in a living room or hallway.
This commission for set of tables came from a chance encounter with an old friend at Glasgow Queens Street station over 2 years ago. My friend had a neighbour with a walnut tree in their back garden that was due to come down as it had grown too big. Details were exchanged and over the following years I helped arrange for the tree to be felled, planked and carefully dried. The owners were very keen to have something made from it as a memento of the tree that their children had grown up with. Although quite a young tree (in tree years) I felt sure that we would get some usable timber from it. As it turned out the risk was worth taking and the end result was a set of unique tables featuring a homegrown walnut table top(s) and Scottish elm frames. Although not the rich chocolate brown of mature walnut the timber has a lovely woody quality to it and the perfect provenance - from back garden to living room.
The design brief was to create a set of tables that could be used as a main dining table and pair of side tables which could be placed at either end of the main table for family get togethers.
I've finally finished the lamp that I've been prototyping over the last few weeks. The cherry veneer gives a lovely warm glow to the lamp and contrasts nicely with the ash frame. As a pro-type I've used a piece of sycamore burr for the base - I needed a light coloured base to match the frame. In production I'd probably use elm for the frame and base with maybe cherry or ash veneer for the lampshade. I prefer to limit my choice of timber to one or two species to give a strong contrast.
I've got a few design tweaks to make regarding the lampshade frame but otherwise I'm quite happy with how its finished. It certainly looks very nice in our hallway!
It's always nice to finish up for Christmas after delivering your last commission of the year. I installed this TV Cabinet with integrated TV Lift yesterday and was extremely pleased (and relieved) it all worked perfectly the first time!
The cabinet is made from the client's own oak and features a pair of book-matched doors. The contrasting colour of the heartwood and sapwood have been used to give visual impact to the straight grain wood. An inset finger pull completes the doors and matches other pieces made previously.
Although the design is in a more traditional style to my natural edge work, there were plenty of challenges to keep me on my toes. The cabinet houses a 46" tv and is about 1300mm in length - making wide doors requires skill to ensure that there is no movement or warping when glued up and installed. I used quarter sawn oak for the door frames and lid as it is the most stable cut of wood to use.
A great end to a difficult year.
The After the Storm exhibition at the Royal Botanic Garden Edinburgh gets underway this weekend (3-4 December) with a special Makers' Market. As well as creating the main pieces of furniture for the exhibition using wood from trees blown down at the Botanics when Cyclone Andrea hit the gardens in 2012, myself and several other makers have been busy making a selection of small products from the same timber.
It's been an enjoyable challenge to come up with creative designs on a smaller scale and I've produced a new range of boxes with a natural edge using birch and maple with burr elm handles. I've also made some limited edition clocks and sets of coasters made from oak, maple, elm and holm oak. Myself and other makers will be at the exhibition this weekend to talk about the project and give people the chance to take home their own piece of Botanics.
The After the Storm Maker's Market is open from 11am-3pm, Sat 3 & Sun 4 December.
I've got a new design of Chopping Boards ready for the Peebles Wood Market this weekend. Made from Beech, each board has a ribbon of contrasting woods running through it - Sycamore and Walnut or Sycamore, Walnut and Elm. An inset handle has been routed into each end which also serves to highlight the different woods. The boards are all finished with a clear mineral oil which is food safe and really gives a lovely smooth finish and rich colour to the wood.
Beech is the perfect wood to use for Chopping Boards, it is close grained, doesn't easily splinter and stands up well to knife cuts etc. That's why it has been used for Butchers Blocks for hundreds of years. Also Beech is reputed to be mildly antiseptic which is another bonus.
I've only got seven of these stunning boards available at the moment in various sizes - so if you know someone you'd appreciate the perfect board you'd best get chopping...
It's nearly time for the Glasgow Contemporary Arts Fair GCAF 2016 (22nd-24th April) again and I've been busy getting new pieces ready. Just finished is this burr elm and walnut side table that features an amazing single piece waney edge top. It's one of three slabs of burr elm I rescued from the firewood pile and squirrelled away nearly 10 years ago. The grain really has to be seen to fully appreciate it - they're like flower petals or Pak Choi or something...
This table features a crisp and elegant frame with curved legs and rails complete with a floating table top. Details include traditional wedged tenons on the bottom of the legs and pegged tenons at the top.
I'm exploring a new direction at the moment taking influences from Mid Century Modern furniture and adding the sculptural organic elements of waney edge wood. I've always been a fan of Mid Century design but wanted to do something more than just replicate existing designs.
Named after a huge oak tree that came from the riverside area near Jedburgh rugby club, this chest of drawers has been quite a challenge to make. Following on from the conjoined ash console table I made last year I wanted to explore using thick waney edge veneers to add an organic edge to my work. Oak is a mid toned, open grained wood so to contrast I chose burr sycamore which has a lighter colour and smooth close grained feel.
The design is inspired by the clean lines of Mid Century pieces which I've given a woody twist by using character grade oak. Through dovetails were used in the cabinet construction with mitred corners added to the front edge to give a cleaner line. The sycamore veneers were consecutively cut from the same board with the top, middle and bottom drawers having one set and the second and forth drawer having another. Applied to the drawer fronts they provide the organic edge that I was looking for and also a sense of depth. To complete the piece, cedar panelling has been used at the back which gives off a subtle aroma whenever the drawers are opened.
This piece has been something of an emotional struggle to finish. I started it last September as an exhibition piece for the Peebles Woodmarket. Sadly my father passed away at the beginning of October last year and all work ground to a halt for several months... Slowly everything has got back on track but I couldn't face finishing this piece. It sat, half made, in the workshop gathering dust. However, bit by bit, I began to work on it again until it was finally finished last month. Its been a tough struggle but I'm glad is finished - I'm sure my Dad would be proud. Whether or not he'd like the design is another story...
Another small batch of tea caddies ready for the Aberdeen Arts Fair. This set have walnut lids with a burr elm handle. There are three different boxes - one each in olived ash, pippy oak and elm. Great fun to make and even better to keep your tea bags in... or anything else you fancy really.
It's been a busy month out and about at the Edinburgh Festival this August. I also managed to do a bit of woodwork on the side getting ready for the Aberdeen Arts Fair. First piece ready for the fair is this oriental inspired console table with drawers and a floating table top. The piece features a unique piece of Ash that is actually two separate tree limbs that have grown together - inosculation. The drawer fronts also have a slice of the same board used to give a natural edge relief to them. The grain pattern and voids are really striking and are definitely a one-off.
My take on a Top Gear style car seat armchair - a pair of recycled Porsche 928 leather seats married to elm chair frames. The design features a low slung relaxed seating position with a curved armrest and raked back leg. I really like the contrast between the distressed leather of the seat and the smooth woody grain of the elm. The colours of the leather and wood compliment each other nicely too.
Car seats are surprisingly heavy with most of the weight towards the back, so the frame was designed with this in mind. To hold everything together I used a variety of wood joints: sliding dovetails, mortice & tenon and open slot mortises - all strong joints that work extremely well in chair construction.
A big thanks to the guys at Ecosse Classic Cars, for their help in prepping the chairs.
Just delivered this bespoke oak settle to my client. Lovely mix of clean and rustic oak which came from their own farm. The settle has curved back slats which give a more relaxed seating position than a traditional 18th Century settle. The cupboard underneath gives amble storage for all their shoes with the inset curved handles adding a nice detail.
I made a set of three tea caddy's for the Glasgow Contemporary Arts Fair last weekend. Designed with a nod to the orient the caddy's feature dovetail joinery and tapered sides. The lid is made from old growth Oregon douglas fir, reclaimed from a whisky wash back, with a sycamore handle. Oak, ash and elm were used for the boxes to give a set using my favourite native woods.
Just delivered a sink stand made to fit in a small alcove in shower room. Just about managed to squeeze the bowl and the tap inside the table frame. It's made from oak and the design features double reverse tapered legs which match several older pieces I made when I was just starting out. Nearly ten years ago...
Below are two media benches made for the same client back in 2006 - one of my first commissions as a new future maker...